top of page
  • Writer's pictureRED FORKLIFTS PTE LTD

Guide to Forklift Maintenance

General Forklift Safety: Daily Checklists

Forklifts should be inspected each day before use and operators can perform these simple, daily checks.

We’re aware that these checks may seem silly to operators, but in reality, the checks take about 3 minutes (if that) to perform and result in a safer operating environment and lower maintenance costs.

Non-driving Checklists

Do this while the forklift is off.

  1. Check your fluid levels (i.e., fuel, water, hydraulic) – Low fluid levels can cause machine malfunctions, like forks not raising properly or brakes not working, which can cause some pretty nasty accidents.

  2. Look for visible damage. See something? Tell your manager – Reporting visible damage can end up saving you from larger repairs in the future.

  3. Check tire condition and pressure – Damaged tires with low pressure will cause your forklift to not function as safely or as effectively as it could.

  4. Forks must be in good condition – Operating poorly maintained forks can cause serious damage to the machine and can cause loads to slip or worse, injuries to employees.

  5. Inspection stickers and decals must be in the right place and legible – This is an OSHA requirement and ensures you can quickly identify a forklift.

  6. Ensure the operator’s compartment is clean and free of debris – A dirty compartment can cause accidents (i.e. slipping on an old water bottle).

  7. Safety devices (i.e., seat belt, finger guards) must be working – People first. Safety equipment is there for a reason, keep it in good condition!

Additional daily checks are required depending on the type of forklift(s). Perform these tests while the truck is off.

Type 1 – Electric Forklifts (batteries power electric forklifts)

  1. Make sure no cables are frayed

  2. Check the battery restraints

  3. Electrolytes must be at proper levels (wear personal protective equipment like rubber gloves, apron, and face shield when checking electrolytes) – Electrolytes allow energy to flow between the truck and battery. If they aren’t at proper levels, your lifts performance will suffer (or it just won’t run).

  4. The hood latch should be secure – You don’t want a hood flying open and causing accidents. You also want to keep the hood secured to prevent debris/damage to the engine and all the other parts under there.

Type 2 – Internal Combustion Forklifts

  1. Check engine oil and engine coolant – The engine is one of the most expensive parts on a forklift and keeping fluid at the right levels keeps the engine healthy.

  2. Check the brake fluid

  3. Belts and hoses must be in good shape

  4. The radiator and air filter should also be in good shape

  5. The hood latch should be secure

Type 3 – Liquid Propane Forklifts

  1. Make sure the propane tank is properly mounted and secured

  2. Check for any tank damage/leaks – Look for white frost or a funky smell! You might also hear a hissing noise if there’s a leak.

  3. The pressure relief valve should be pointing up – This ensures the tank is aligned properly with the truck; it prevents spraying accidents and also makes sure most of the LP gets used up

  4. Hoses and belts should be in good shape

Driving Checklists

All forklift types require the same driving checklist. Do this while the forklift is on.

  1. Make sure your steering, accelerator, and brakes work

  2. Check that your gears work (forward and reverse)

  3. Make sure the lift works (tilt and hoist)

  4. Check that the horn, lights, and backup alarm work

Creating A Forklift Maintenance Plan

Now that we’ve got the forklift safety basics out of the way, let’s move on to something more robust. Creating a forklift maintenance plan is something that will benefit your business for years to come.

Like any other asset, forklifts need a proper preventive maintenance plan to ensure your company achieves its best bottom-line.

1. Consider The Circumstances

The first step in creating a forklift maintenance plan is to consider what should be inspected and how often. These considerations will help you create a plan of action for the future. Ask yourself the following:

  • How old are your forklifts? – Older lifts often require more frequent maintenance.

  • Have they been serviced appropriately in the past and is there a record of service? – This also helps in determining what the maintenance schedule should look like for a particular forklift.

  • What are the safety requirements for your forklifts? Refer to the above info. – Safety checks and requirements should be built into your maintenance plan.

  • Is the machine susceptible to damage (like alignment issues)? – If so, you might want to consider adding extra checks to maintenance dates.

  • Are there colleagues or supervisors that could assist you in putting together the best plan? – If so, reach out to them and note their advice.

2. Create A Forklift Maintenance Schedule

Now that you know what you’ve got to look out for, you can successfully begin to create a schedule for forklift maintenance. Preventive maintenance can save a company thousands, if not millions of dollars per year. Consider the following questions while you’re piecing together the appropriate schedule.

  • What type of Forklifts do you have? Internal Combustion, Propane, or Electric?

  • What are the recommended preventive maintenance checks (refer to the list above)?

  • Which tasks will you perform? Which tasks do you want to outsource?

  • How often will these tasks need to be completed?

Change the tires regularly and watch for tire damage.

Bad tires can cause accidents and add costs. Avoid unnecessary mishaps like five pallets of the product being knocked over because an operator’s tires were too worn to break in time. That will cost your company thousands of dollars. Plus, crappy tires can increase your fuel costs.

Don’t run into things.

Keep your facility clean. Make sure there’s plenty of space for trucks to get around and make sure there are rules and regulations in place for operating the trucks including right-of-way for multiple vehicles. Preventing accidents is the best way to avoid added costs and unexpected maintenance.

Use qualified and licensed technicians.

The person changing tires should be licensed to do that; the person repairing an LPG tank should be licensed to do so. What good is all the preventive planning if the repairs are crap?

Keep your forklifts CLEAN.

Wash em’ down (seriously!) so you can see what’s broken or damaged and what’s ready to go. It only takes a couple of minutes to wash a truck with water (not flammable liquids). Dirty vehicles make it hard to spot damage. Letting dirt/grease pile up on your forks can damage the forks, as well as their operational mechanisms.

Streamline a process for dealing with corrective maintenance.

Make sure you can document an issue, tag it, get it to the repair shop, and ensure that it’s repaired efficiently. Streamlining will save everyone time, money, and headaches. If you’d like, you can implement a software program to do this for you. Our software can streamline the entire forklift maintenance process.

Final Thoughts

Forklift safety is an excellent way to keep your maintenance costs at bay. It’s clear that implementing daily inspection checks and long-term forklift maintenance plans will save your company both time and money, as well as from unexpected accidents!

What are your personal experiences with forklift maintenance? Do you have any stories? Let us know in the comments below!

88 views0 comments
bottom of page